CW118C Tellurium Copper Alloy

CW118C Tellurium Copper Alloy
Details:
Tellurium Copper Alloy offers exceptional fabrication properties while retaining physical and mechanical characteristics similar to pure copper. The inclusion of tellurium enhances its free-machining capabilities, making it easier to work with during manufacturing processes. The alloy's optimal hot working temperature range is 750-875°C (1400-1600°F), and it boasts a hot forgeability rating of 65 (closed die only), with forging brass rated at 100 for comparison. This unique forgeability makes it ideal for producing closed-die hot forged components that demand high electrical conductivity and excellent corrosion resistance.
Send Inquiry
Description
Send Inquiry

CW118C, also known as Tellurium Copper or C14500, is a high-performance copper alloy that contains a small percentage of tellurium. This addition significantly improves the machinability of the alloy while maintaining excellent electrical and thermal conductivity. Unlike leaded coppers, Tellurium Copper Alloy in its hard condition is less susceptible to softening under heat, allowing it to perform reliably at elevated temperatures. Additionally, it can be hot worked at higher temperatures than other free-cutting copper alloys, further expanding its versatility in demanding applications. These properties make it a preferred choice for industries requiring precision, durability, and high performance.Here are some key points about CW118C Tellurium Copper Alloy.

 

Chemical Composition

 

Copper (Cu): Balance (typically > 99.5%)

Tellurium (Te): 0.4 - 0.7% (Key alloying element)

Phosphorus (P): < 0.015% (For oxygen control)

Total Impurities: Very low

 

Mechanical & Physical Properties (Half-Hard Temper)

 

Electrical Conductivity: ≥ 98% IACS

Thermal Conductivity: ~ 360 W/(m·K)

Tensile Strength: 260 - 320 MPa

Yield Strength (0.2%): 200 - 280 MPa

Elongation: ≥ 15%

Brinell Hardness: 75 - 95 HB

 

Tellurium Copper Alloy standard

 

  • EN 12163: Copper and copper alloys - Rod for general purposes.
  • EN 12164: Copper and copper alloys - Rod for free machining purposes.
  • ASTM B301/B301
  • U.S.A. ASTM-C14500
  • CHINA GB-QTe0.5
  • JAPAN JIS-C1450
  • GERMANY DIN-CW118C(CuTeP)
  • U.K. BS-C109

 

Processing & Handling Considerations

 

Cold Working: Can be cold worked via drawing, rolling, bending, and stamping. Cold work hardening can be relieved by low-temperature annealing (approx. 300-400°C) to restore ductility.

Hot Working: Hot working temperature range is approximately 650-850°C, followed by rapid cooling.

Welding: Suitable for gas-shielded welding (TIG/MIG), resistance welding, and brazing. Due to the presence of tellurium, fusion welding may lead to micro-cracks or porosity, requiring strict process control. Brazing is the preferred method.

Heat Treatment: Not typically used for strengthening. The only heat treatment is recrystallization annealing to relieve cold work hardening.

 

Features

 

  • High Machinability: The addition of tellurium greatly enhances the machinability of the alloy, making it easier to cut, drill, and shape.
  • Electrical Conductivity: CW118C retains good electrical conductivity, though slightly lower than pure copper.
  • Thermal Conductivity: It also maintains excellent thermal conductivity, making it suitable for heat exchange applications.
  • Corrosion Resistance: The alloy has good corrosion resistance, similar to pure copper, but may be slightly less resistant in certain environments due to the presence of tellurium.
  • Wear Resistance: Improved wear resistance compared to pure copper, making it suitable for applications involving friction.

 

Forms

 

Plate: Available in various thicknesses and sizes to meet specific application requirements.

Sheet: Can also be supplied in sheet form for applications requiring thinner materials.

Rod and Bar: Available in round, square, and hexagonal shapes.

Wire: Used in electrical and electronic applications.

 

Tempers

 

  • Soft (Annealed): Highly malleable and ductile, suitable for forming and bending.
  • Hard: Increased strength and hardness, suitable for applications requiring higher mechanical properties.
  • Half-Hard: Intermediate properties between soft and hard tempers.

 

Surface Finish

 

  • Mill Finish: Standard finish as produced by the mill.
  • Polished: Smooth and shiny surface for aesthetic or functional purposes.
  • Coated: Various coatings can be applied for additional protection or specific functional requirements.

 

Customization

 

Cut-to-Size: Plates, rods, and bars can be cut to specific dimensions based on customer requirements.

Custom Alloys: Available in various copper alloys to meet specific performance criteria.

 

Ordering Options

 

 

High-Volume Orders: Suitable for large-scale industrial applications.

Low-Volume Orders: Available for smaller projects or prototyping needs.

 

Test Equipment

 

Test Equipment

 

Applications

 

Electrical Components: Used in electrical connectors, terminals, and other components where good conductivity and machinability are required.

Heat Exchangers: Suitable for heat exchanger plates and other thermal management applications.

Machined Parts: Ideal for producing complex machined parts that require precise tolerances and good surface finish.

Plumbing and HVAC: Used in fittings, valves, and other components in plumbing and HVAC systems.

Automotive: Applied in various automotive components that require high conductivity and durability.

 

Applications

 

Related Products

 

product-400-400
C14700
product-400-400
C18700
product-400-400
C19160
product-400-400
CW113C
product-460-460
CW114C
product-400-400
CW118C

 

FAQ

 

Q:What information should i confirm you when i send inquiry

A:Sometimes we need product specification like material standard or Grade, size, Qty, shipping port, Terms like FOB or CIF etc.

 

Q: How long of the delivery time?

A: Usually, the shipment can be delivery within 15-30days after the order confirmed.

 

Q: How about the payment items?

A: LC, T/T, PayPal, Western Union etc.

 

Q: Which country have you exported to?

A: Our main market is South America, Middle East, Africa and Europe. And have built long time relationship with Pakistan, US, Norway, Germany, Korea, Russia,Taiwan customers.And got continue orders from them every month.

 

Q: Can i visit your factory?

A: Sure! Welcome in any time.

 

Q: How about the MOQ?

A: Normally we dont have MOQ requirement, We always expect more opportunities with you. But for some special material or special size let's communicate the actual status.

 

Q: Can you support us in the applications?

A: It is our pleasure!

 

Q: Can you accept the inspection from a third party?

A: Yes. We have enough experience to cooperate with the inspection project.

Hot Tags: cw118c tellurium copper alloy, China cw118c tellurium copper alloy manufacturers

Send Inquiry