Li-Ion Battery Anode Single Layer Graphite Coated Copper Foil

Li-Ion Battery Anode Single Layer Graphite Coated Copper Foil
Details:
Li-ion battery anode single-layer graphite-coated copper foil is a key enabler of modern lithium-ion battery technology. Its combination of high electrical conductivity, excellent adhesion, and lightweight properties makes it indispensable for applications in consumer electronics, electric vehicles, and renewable energy storage. As the demand for high-performance batteries continues to grow, this material will remain at the forefront of innovation in energy storage solutions.
Send Inquiry
Description
Send Inquiry

The anode material in lithium batteries typically consists of graphite, silicon-based materials, and other compounds. Among these, graphite-based lithium-ion batteries are the most widely used due to their reliability and performance. The anode material serves as the positive electrode of the battery and acts as the primary storage medium for lithium ions during the charging and discharging cycles.

 

Lithium-ion copper foil is also utilized as an anode current collector in lithium batteries. During the battery manufacturing process, the anode material interacts with the cathode material through the electrolyte, facilitating the transfer of lithium ions between the two electrodes. The primary role of lithium copper foil as an anode current collector is to provide a conductive pathway, enabling the anode material to efficiently store and release lithium ions, thereby ensuring optimal battery performance.

 

 

Standards and Specifications

 

Thickness: Typically ranges from 6 to 12 micrometers for the copper foil, with a graphite coating of a few micrometers.

Purity: Copper foil with a purity of 99.9% or higher.

Adhesion Strength: Ensures the graphite coating remains intact during battery assembly and operation.

Coating surface:0.97g/dm2

Active material:4.43g

Capacity:330g/mah

Width:200mm, Thickness:0.076mm

 

Product Structure and Working Method

 

Product Structure

The primer layer technology for carbon-coated copper foil (CCF) appears to address critical challenges in lithium-ion battery (LIB) anodes, particularly in improving interfacial contact, reducing stress from active material expansion, and protecting current collectors.

 

product-1500-750

2.Working Method

Primer layer plays a critical role in enhancing the performance of carbon-coated copper foil (CCF) for lithium-ion battery(LIB) anodes. The primer acts as an interfacial bridge between the copper current collector and the anode active material (e.g., graphite, silicon).

 

Polymer technologies

 

Composition

 

  • Base Material

Copper Foil: High-purity copper foil is used as the base material due to its excellent electrical conductivity, flexibility, and mechanical strength.

  • Coating Material

Graphite: A single layer of graphite is coated onto the copper foil. Graphite is chosen for its ability to store lithium ions during the charging and discharging process, making it a key component of the anode.

 

Manufacturing Process

 

  •  Foil Preparation

High-purity copper is rolled into thin foils of precise thickness.

  • Graphite Coating

A single layer of graphite is uniformly applied to the copper foil using advanced coating techniques such as slot-die coating or chemical vapor deposition (CVD).

  • Drying and Calendering

The coated foil is dried and calendered to ensure proper adhesion and smoothness.

  • Quality Control

The final product undergoes rigorous testing for thickness, adhesion, conductivity, and uniformity.

 

Structure Diagram of Li-Ion Battery Anode Single Layer Graphite Coated Copper Foil

 

product-1108-491

Properties

 

  • High Electrical Conductivity

Copper foil provides a low-resistance pathway for electron flow, enhancing the battery's efficiency.

  • Excellent Adhesion

The graphite coating adheres firmly to the copper foil, ensuring stability during battery operation.

  • Uniform Coating Thickness

The single-layer graphite coating is applied uniformly to ensure consistent performance across the anode.

  • Flexibility and Durability

The copper foil is thin yet durable, allowing it to withstand the mechanical stresses of battery assembly and operation.

  • Thermal Stability

Both copper and graphite exhibit good thermal conductivity, helping to manage heat generated during charging and discharging.

  • Lightweight

The combination of thin copper foil and a lightweight graphite coating contributes to the overall reduction in battery weight.

 

Contact now

Advantages

 

  • Enhanced Battery Performance

Improves the battery's energy density, charge/discharge cycles, and overall efficiency.

  • Cost-Effective

The use of copper foil and graphite offers a balance between performance and cost.

  • Reliability

Ensures stable and long-lasting battery operation, even under high-stress conditions.

  • Scalability

Suitable for mass production, meeting the growing demand for Li-ion batteries.

Structure Diagram of Li-Ion Battery Anode Single Layer Graphite Coated Copper foil

 

Test Equipment

 

 

Test Equipment

Certificate

 

Certificates

 

Applications

 

  • Lithium-Ion Batteries

Used as the anode material in various types of Li-ion batteries, including those for consumer electronics, electric vehicles (EVs), and energy storage systems.

  • Portable Electronics

Found in smartphones, laptops, tablets, and other portable devices requiring high-energy-density batteries.

  • Electric Vehicles (EVs)

Essential for EV batteries, where high performance, durability, and energy efficiency are critical.

  • Renewable Energy Storage

Used in batteries for solar and wind energy storage systems

 

Application

 

Company Profile

 

HSMetal focuses on the R&D and production of conductive and thermally conductive interface materials for new energy power battery cells, modules, and battery housings. HSMetal has invested significant human and material resources in the independent research and development of conductive materials. Our core business, the conductive series products for lithium-ion batteries, has gained widespread acceptance in the new energy and 5G fields.

 

We utilize primer technology to enhance electrode materials and unlock their full potential in practical applications. Our primer is an ultra-thin coating based on carbon, graphite, or carbon nanotubes, compatible with virtually any substrate. By applying this coating to electrodes, we effectively mitigate material degradation, enhancing both battery performance and safety. While pre-coating is an established method, our decade of research has refined its use to significantly boost the effectiveness of diverse battery formulations.

 

HSMetal's conductive coated foil is recognized as a leading solution in the global lithium-ion battery sector. We have become a strategic partner to numerous internationally renowned manufacturers of new energy vehicles and energy storage systems. The product has gained widespread market acceptance and has enabled the formation of an integrated industrial ecosystem centered around our conductive foil technology.

We are planning a development strategic growth path to create significant value in the clean energy industry.

 

Equipment

Equipment

Carbon Coated Aluminum Foil

Automobile manufacturing

Carbon Coated Copper Foil

Carbon Coated Copper Foil

Quality Control

Quality Control

R&D Capability

R&D Capability

Product Package

Product Package

FAQ

 

Q1: What info. should I let you know if i would like to get a quotation for the the Electrolytic copper foil?

A1: The material size (Thickness*Width*Length and total Qty). If possible, it would be more better to advise the application of the product

Then we can recommend the most suitable products with details for confirmation.

 

Q2:How long is your delivery time?

A2:Generally it is 5-10 days base on we have stock on hand. or 15-20 days if no inventory, then need check with our production team for lead time according to the quantity.

 

Q3: Do you provide samples ?

A3:Yes, if standard sizes sample is free but buyer need to pay freight cost.

 

Q4:What is your terms of payment ?

A4: Normal payment term is 30%TT, 70% before shipment get ready to ship

 

Q5: How do you guarantee the quality of the products?

A5: Each step of production and finished products will be carried out inspection by QC department before storing to the warehouse. NG products are not allowed in the completed goods warehouse.

 

Hot Tags: li-ion battery anode single layer graphite coated copper foil, China li-ion battery anode single layer graphite coated copper foil manufacturers

Send Inquiry