HSMetal's copper foil for solid state battery is specially engineered as anode current collector for all-solid-state batteries (ASSB), semi-solid batteries and anode-free solid-state battery cells. Unlike standard electrolytic copper foil designed for conventional liquid electrolyte lithium-ion batteries, our copper foil for solid state battery focuses on low interfacial contact resistance, stable lithium plating/stripping, compatibility with sulfide, oxide and polymer solid electrolytes, and dendrite suppression under high pressure and high-temperature sintering conditions.
We supply both ED electrolytic copper foil and RA rolled annealed copper foil for solid-state battery development. The two materials behave differently in grain structure, bending resistance, surface roughness and lithium plating stability. If you are confused about which base copper foil type fits your cell design, read our full comparative guide: ED Copper Foil vs RA Copper Foil:A Buyer's Guide to Selection and Risk Avoidance. For full numerical property data, tolerance ranges and standard test conditions, download our official reference sheet from our resource centre: Copper Foil Technical Specification Datasheet.
Material Specifications
| Parameter | Standard Range | High-Strength Option |
|---|---|---|
| Thickness | 4 μm – 8 μm – 12 μm | 6 μm – 8 μm |
| Tensile Strength | ≥ 400 MPa | ≥ 550 MPa |
| Elongation | ≥ 5.0% | ≥ 3.5% |
| Surface Roughness (Ra) | ≤ 0.3 μm (standard) / ≥ 0.45 μm (roughened) | Customizable |
| Surface Treatment | Chromium-free passivation | Ni-alloy passivation |
| Width | 100 mm – 1,300 mm (slit to order) | Same |
| Areal Density | Per thickness spec | Per thickness spec |
| Oxidation Resistance | ≤ 1 at.% surface oxygen after 200°C/3h | Enhanced |
Note: High-strength variant references Ni-alloying research demonstrating 583 MPa and 88.43% strength retention after thermal exposure. Roughened surface data reflects dual-sided roughening achieving Ra ≥ 0.45μm for solid electrolyte contact.
What Is Copper Foil for Solid State Battery?
Copper foil for solid state battery applications is a thin, electrically conductive metal material that may serve as an anode current collector or another conductive component, depending on the battery architecture.In battery designs that use copper as the anode current collector, the foil provides an electrical pathway between the active electrode material and the external circuit. Its thickness, conductivity, surface characteristics, mechanical strength, and dimensional stability can influence electrode processing and overall cell integration.
Compared with conventional liquid-electrolyte lithium-ion batteries, solid-state battery systems may impose different requirements on electrode interfaces, contact stability, pressure management, and mechanical integrity. As a result, selecting the appropriate copper foil requires more than simply choosing the thinnest available material.

Product Classification
| Grade | Core Feature |
|---|---|
| Plain High Strength Copper Foil For Solid State Battery | Low bulk resistivity, stable mechanical property, cost-effective for polymer solid electrolyte systems, suitable for low-to-medium current density anode-free cells |
| Carbon Coated Copper Foil For Solid State Battery | Improves lithium wettability, homogenizes lithium nucleation, reduces interfacial impedance, suppresses uneven lithium dendrite growth, widely used for sulfide solid-state batteries |
| Microporous Copper Foil For Solid State Battery | Offers extra lithium storage space, accommodates volume expansion, enhances solid electrolyte infiltration, ideal for high-energy-density lithium metal solid-state anodes |
| Nickel-plated Copper Foil For Solid State Battery | Outstanding chemical corrosion resistance against sulfide solid electrolyte, slows interface degradation for long-cycle ASSB; comes with relatively higher interfacial resistance and weaker lithium wettability |
If your design is still evolving, consider these adjacent solutions:
| Challenge | Our Solution | Alternative / Replacement Consideration |
|---|---|---|
| Sulfide electrolyte corrosion of bare Cu | Nickel-plated copper foil (0.08–0.40 µm Ni) | SUS foil or pure Ni foil-higher cost, thicker, less process-compatible |
| Lithium dendrite penetration | 3D porous copper foil | Composite copper foil (polymer + Cu) for safety, but lower conductivity |
| High-silicon anode mechanical stress | Ultra-high tensile copper foil (≥700 MPa) | Alloy copper foil with tailored microstructure |
| Weight reduction for eVTOL | Ultra-thin 3.5–4.5 µm foil | Composite foil (lighter but requires process adaptation) |
Explore our nickel-plated copper foil for sulfide systems, 3D porous copper foil for lithium-metal anodes, and ultra-thin copper foil for high-energy-density designs. If you are unsure, our specification matching guide walks you through the selection process.
Commercial And Delivery Terms
| Item | Details |
|---|---|
| MOQ | 50 kg (trial order); 200 kg (standard production) |
| Sample Policy | Free A4-size samples for evaluation; shipping cost borne by buyer |
| Lead Time | Samples: 3–5 working days; Bulk orders: 15–25 working days |
| Packaging | Vacuum-sealed foil rolls on plastic cores; desiccant and moisture indicator included |
| Shipping | Air freight (DHL/FedEx/UPS) for samples; sea freight for bulk |
| Payment Terms | T/T, L/C at sight (negotiable for long-term partners) |
| Incoterms | FOB, CIF, DDP (please specify at inquiry) |
Different Applications for Each Type of Copper Foil For Solid State Battery
| Application | Recommended Foil | Why |
|---|---|---|
| EV traction batteries (high-nickel / high-silicon) | Ultra-high tensile copper foil | Withstands calendaring and cycling stress; compatible with aggressive anode formulations |
| Sulfide-based all-solid-state batteries | Nickel-plated copper foil | Ni layer prevents sulfide electrolyte corrosion and high-temperature oxidation |
| Lithium-metal anode solid-state cells | 3D porous copper foil | Uniform Li deposition; reduces dendrite risk through structured current collector |
| eVTOL / drone batteries | Ultra-thin copper foil (3.5–4.5 µm) | Weight savings directly translate to payload and range |
| Semi-solid / hybrid systems | Standard or Ni-plated foil | Cost-effective; compatibility with gel or hybrid electrolytes |
| High-temperature processing cells | Nickel-plated copper foil | Ni plating resists oxidation during high-temp drying and sintering |
Key difference in application: Standard lithium-ion copper foil prioritizes conductivity and cost. Solid-state copper foil must additionally address interfacial stability (solid-solid contact), chemical compatibility (sulfide/PEO electrolytes), and mechanical integrity under stack pressure. That is why our portfolio separates nickel-plated, porous, and high-tensile grades rather than offering a single "solid-state" product.
About Us
We specialize in providing copper foil solutions for battery manufacturing, solid-state battery development, and advanced energy storage applications. With a focus on material quality, specification flexibility, and responsive customer service, we help battery manufacturers, research laboratories, and material developers identify suitable copper foil for their specific requirements.
Our product solutions include battery-grade electrodeposited copper foil, rolled copper foil, ultra-thin copper foil, and customized surface-treated copper foil, subject to product availability and technical requirements. We support customization of thickness, width, surface finish, roll dimensions, and other agreed specifications to meet different electrode designs and manufacturing processes.
We understand that consistent quality and reliable delivery are essential to your project. From sample evaluation and technical specification confirmation to order processing and shipment coordination, our team works to provide practical material solutions and efficient service for both development-stage projects and commercial procurement.
Whether you are sourcing Copper Foil for Solid State Battery applications, silicon-based anode development, or conventional lithium-ion battery production, we welcome your inquiries and look forward to supporting your material sourcing needs.
Contact us today to discuss your copper foil requirements, request a customized quotation, or explore suitable material options for your next-generation battery project.
👉 Explore specifications and request a sample

Automated continuous production line for Copper Foil

Finished Jumbo Roll of Copper Foil

Copper Foil Clean‑room Production Workshop

Electrochemical data analysis

Precision inspection of electrolytic copper foil

Lab testing for copper foil performance
Ready to Match a Right Foil to Your Solid-State Design?
Request a sample kit today.
Tell us:
- Your electrolyte system (sulfide / oxide / polymer / hybrid)
- Target thickness and width
- Anode chemistry (graphite / silicon / lithium-metal / anode-free)
Request a free sample now to validate your interfacial impedance and lithium plating performance.
Request Free Samples → | Download Full Specification PDF → | Talk to a Materials Engineer →
FAQ
Q1: What is Copper Foil for Solid State Battery applications?
A: It is a thin copper material that may serve as an anode current collector or conductive component in solid-state battery architectures that require copper. Selection depends on the cell design and interface requirements.
Q2: What is the difference between copper foil for solid state battery and regular lithium battery copper foil?
A: Regular lithium battery copper foil works with liquid electrolyte and focuses on tensile strength and etching performance. Copper foil for solid state battery prioritizes interface stability, lithium wettability, anti-corrosion performance against solid electrolyte and dendrite suppression. Surface modification such as carbon coating, porous structure and nickel plating are common for solid-state grades.
Q3: What is copper foil for solid state battery?
A: Copper foil for solid state battery is a specialized anode current collector material developed for all-solid-state, semi-solid and anode-free solid-state lithium batteries. It is optimized to match solid-solid contact interface, suppress lithium dendrite, reduce interfacial resistance and adapt to different solid electrolyte systems including sulfide, oxide and polymer electrolytes, different from conventional copper foil for liquid lithium-ion batteries.
Q4: What is the difference between ED copper foil and RA copper foil?
A: ED copper foil is produced through electrodeposition, while RA copper foil is produced through rolling and annealing. They can differ in surface characteristics, mechanical behavior, and manufacturing suitability. It depends on your cell architecture.ED (electrolytic) foil dominates in cost-sensitive, high-volume pouch and prismatic formats and is the default for most sulfide/oxide ASSB pilot lines. RA (rolled) foil wins in flexible, high-vibration, or bend-cycling designs thanks to superior fatigue resistance-at a cost premium.
Q5: Can copper foil be customized for silicon-based anodes?
A: Yes, suitable candidates can be evaluated based on mechanical strength, elongation, thickness, and surface requirements. High-strength or specially treated copper foil may be worth evaluating, but cell-level validation is necessary.
Q7: Can you supply carbon-coated or surface-treated copper foil?
A: Customized surface options can be reviewed according to manufacturing capability. Please specify the coating type, coating thickness, coated sides, and required performance characteristics.
Q8: How do I choose the correct surface roughness?
A: Surface roughness should be selected according to electrode materials, coating or lamination processes, interface contact requirements, and the relevant test results. A single roughness value is not suitable for every solid-state battery design.
Q9: Can copper foil be replaced with aluminum foil?
A: Not universally. Copper and aluminum have different electrical, mechanical, and electrochemical characteristics. Any substitution must be assessed for the intended electrode potential, chemistry, interface stability, and current-collection function.
Q10: Which grade copper foil for solid state battery should I choose for sulfide solid electrolyte?
A: Carbon coated copper foil is the first recommendation for most sulfide solid-state projects to balance low impedance and dendrite suppression. If you prioritize ultra-long cycle stability and strong anti-corrosion capacity, select nickel-plated copper foil. Microporous copper foil is preferred when you need high lithium loading and volume buffering for lithium metal anode.
Q11: Is microporous copper foil always better for solid state battery?
A: No. Microporous copper foil brings larger specific surface area and volume buffering capacity, but it comes with higher cost and lower mechanical strength. It is suitable for lithium metal anode designs. For low-cost polymer solid-state anode-free cells, plain high strength copper foil is more suitable.
Q12: Can this copper foil be sintered together with solid electrolyte?
A: Our high-strength, carbon coated, microporous and nickel-plated copper foil can withstand the normal hot pressing and sintering temperature range of solid-state cell manufacturing. We can provide high-temperature stability test data upon request.
Q13: Where can I get side-by-side comparison of ED copper foil and RA copper foil for solid-state battery design?
A: We have published a dedicated buyer guide covering process differences, application boundaries and common failure risks. Visit ED Copper Foil vs RA Copper Foil:A Buyer's Guide to Selection and Risk Avoidance. You can also download the full parameter table for all copper foil grades from our resource page: Copper Foil Technical Specification Datasheet.
Q14: What is the difference between this foil and standard lithium-ion battery copper foil?
A: Standard lithium-ion foil is optimized for cost and adhesion to graphite slurry in liquid-electrolyte systems. Solid-state foil must additionally resist oxidation during dry-room processing, suppress interfacial reactions with solid electrolytes (especially sulfides), and maintain mechanical integrity under stack pressure. Our SSB grades use chromium-free passivation and, in the high-strength variant, Ni-alloy surface engineering to meet these demands.
Q15: Can I use standard 6μm lithium-ion foil for my solid-state prototype?
A: For early feasibility testing with oxide electrolytes and low cycle counts, yes. For sulfide systems or any qualification program targeting >200 cycles, standard foil will likely show interface degradation and early capacity fade. We recommend starting with SSB-STD at minimum, and SSB-HS for sulfide chemistries.
Q16: How do you handle oxidation during shipping and storage?
A: Foils are vacuum-sealed with desiccant and shipped in moisture-barrier packaging. For extended storage, we recommend dry-room conditions (<1% RH) and use within 6 months of opening. Passivated surfaces maintain performance significantly longer than untreated foil, but no copper foil is indefinite-storage stable. Packaging and shelf-life details are documented in the Copper Foil Technical Specification Sheet.
Q17: What is the difference between nickel-plated copper foil and bare copper foil for solid-state batteries?
A: Bare copper foil reacts with sulfide electrolytes and oxidizes at elevated temperatures, leading to interface degradation. Nickel-plated copper foil adds a thin Ni-based passivation layer (typically 0.08–0.40 µm) that acts as a corrosion and oxidation barrier, significantly improving cycle life and thermal stability in sulfide-based solid-state cells.
Q18: Can I use your microporous copper foil with a lithium-metal anode?
A: Yes. The microporous 3D conductive framework offers extra lithium storage space and accommodates volume expansion, while enhancing solid electrolyte infiltration. This is ideal for high-energy-density lithium-metal solid-state anodes.
Q19: Do you offer ultra-thin foil below 4.5 µm?
A: Yes. We supply 3.5 µm and 4 µm grades for weight-sensitive applications such as eVTOL and high-energy-density EV cells. Note that thinner foil requires careful handling during coating and calendaring; our technical team can advise on process compatibility.
Q20: How do I select the right copper foil for my solid-state battery project?
A: Start with your electrolyte chemistry and anode type. Sulfide electrolytes → nickel-plated or carbon-coated. Lithium metal → microporous. Polymer electrolyte / anode-free → plain high strength. High-silicon → ultra-high tensile alloy. If you are still in the material screening phase, request our sample kit containing small rolls of each grade for side-by-side evaluation.
Hot Tags: copper foil for solid state battery, solid state battery copper foil, nickel-plated copper foil, porous copper foil, ultra-thin copper foil, anode current collector, sulfide solid electrolyte compatible foil, battery grade copper foil supplier

