Inconel 718 (Alloy 718, UNS N07718) Plate & Sheet | Custom Sizes & Fast Delivery | China Manufacturer

Inconel 718 (Alloy 718, UNS N07718) Plate & Sheet | Custom Sizes & Fast Delivery | China Manufacturer
Details:
Inconel 718 Plate & Sheet is a precipitation-hardenable nickel-based alloy supplied for applications requiring high strength, corrosion resistance, and reliable performance at elevated temperatures. Also known as Alloy 718 and identified by UNS N07718, Inconel 718 is widely used for aerospace components, gas turbine equipment, oil and gas applications, and other demanding industrial components. We supply Inconel 718 plate and sheet in custom sizes according to applicable material specifications, dimensional requirements, heat-treatment conditions, and inspection requirements. Common specifications include AMS 5596, AMS 5597, and ASTM B670 / ASME SB670. Haynes International also lists N07718 under HAYNES 718 with these sheet and plate specifications. Custom sizes and fast delivery are available for qualified orders.
Send Inquiry
Description
Send Inquiry

Inconel 718 (Alloy 718, UNS N07718, W.Nr 2.4668) Plate / Sheet is gamma‑double‑prime precipitation‑hardened nickel‑iron‑chromium‑niobium wrought superalloy plate and sheet stock. We supply hot‑rolled plate and cold‑rolled sheet in multiple metallurgical conditions, supporting full custom dimension cutting, small‑lot sample supply and volume serial production.

 

Material note: Inconel 718 maintains premium mechanical performance up to continuous 650 °C. Long‑term service above 650 °C will trigger γ″ phase over‑aging. For higher‑temperature plate stock requirements, buyers frequently evaluate Haynes 230 and Haynes 282 plate alternatives.

 

For full performance comparison, temperature threshold and substitution risk assessment, review our article: Haynes 230 vs Haynes 282 vs Inconel 718: A High‑Temperature Alloy Selection Guide for Engineers and Buyers.

 

 

Inconel 718 Plate/Sheet Specifications

 

Item Specification
Product Inconel 718 Plate / Sheet
Alloy Inconel 718 / Alloy 718
UNS N07718
DIN 2.4668
Material Type Precipitation-Hardenable Nickel Alloy
ASTM ASTM B670 / ASME SB670
Aerospace Specifications AMS 5596 / AMS 5597
Product Form Plate / Sheet
Heat Treatment As specified by applicable standard or customer requirement
Surface Hot Rolled / Cold Rolled / Pickled / Machined / As specified
Dimensions Standard and Custom Sizes
Inspection Standard / Third-Party Inspection Available
Origin China
Supply China Manufacturer / Custom Production

 

ASTM B670-25 covers rolled precipitation-hardening nickel alloy UNS N07718 plate, sheet, and strip in the annealed condition for high-temperature service. The standard also specifies chemical requirements and mechanical properties after precipitation hardening.

 

What Is Inconel 718 Plate?

 

Inconel 718 is a nickel-iron-chromium alloy strengthened through precipitation hardening. Its alloy system includes niobium, molybdenum, titanium, and aluminum to provide high mechanical strength and good performance in demanding service conditions.

 

In plate and sheet form, 718 is commonly selected for fabricated components, structural parts, machined components, covers, brackets, and other applications where a combination of strength, corrosion resistance, and elevated-temperature capability is required.

 

The alloy is also available in other product forms, including bar, rod, forgings, welding wire, and seamless tube, allowing engineers to select the appropriate form for different manufacturing processes.

 

Why Buyers Choose Inconel 718 Plate & Sheet

 

  • Good Fabrication Characteristics:Inconel 718 offers relatively good fabrication characteristics compared with some highly strengthened nickel superalloys. HAYNES 718 is described by Haynes International as combining excellent strength with good fabrication characteristics in the annealed condition.
  • Suitable for Precipitation Hardening:Heat treatment is an important part of achieving the required mechanical properties of 718. The applicable material specification and customer drawing should therefore be confirmed before production.
  • High Mechanical Strength up to 704°C. Inconel 718 plate and sheet deliver exceptionally high yield, tensile, and creep-rupture properties at temperatures up to 1300°F (704°C).
  • Excellent weldability. The alloy's slow aging response permits heating and cooling during annealing without the danger of cracking - a critical advantage over other age-hardenable alloys.
  • Superior corrosion resistance. Inconel 718 offers excellent resistance to pitting, crevice corrosion, and stress corrosion cracking (SCC) - especially in chloride and sulfide environments.

 

Inconel 718 vs Inconel 625

 

Inconel 718 and Inconel 625 are both nickel-based alloys, but they are commonly selected for different performance requirements. Inconel 718 focuses on high mechanical strength through precipitation hardening, while Inconel 625 is widely valued for corrosion resistance, weldability, and fabrication characteristics.

Property Inconel 718 Inconel 625
UNS N07718 N06625
Alloy Type Precipitation-hardenable nickel alloy Nickel-chromium-molybdenum alloy
Main Advantage High strength Corrosion resistance & weldability
Strengthening Precipitation hardening Solid-solution strengthening
Fabrication Good Excellent
Typical Applications Aerospace, gas turbines, high-strength components Chemical processing, marine, oil & gas, aerospace
Plate/Sheet Standards AMS 5596 / 5597, ASTM B670 AMS 5599, ASTM B443

 

Inconel 718 is generally considered when high mechanical strength is the primary requirement, particularly for highly loaded components. Inconel 625 is often considered when corrosion resistance, welding, forming, and demanding service environments are more important.

 

Need help choosing nickel superalloy grades? Read our full comparison: [Inconel 625 vs Inconel 718: Key Differences in Corrosion Resistance, Strength & Welding]

 

Why Buyers Choose Our Inconel 718 Plate & Sheet

 

  • Custom sizes cut to your drawing. No standard-size compromise. We cut Inconel 718 plate and sheet to your exact dimensions - thickness, width, length - reducing material waste and secondary machining.
  • Full specification compliance. Every shipment meets AMS 5596 / ASTM B670 requirements. Batch-specific Mill Test Certificate documents actual chemical composition and mechanical properties.
  • Single-grade, single-heat verified. We do not mix grades. PMI spectral verification supported on-site. No substitutions without written approval.
  • Stock inventory for fast delivery. Common thicknesses maintained in stock. Standard sizes ship in 7–15 days. Custom cut sizes confirmed at order review.
  • Full thickness range. Plate from 0.3 mm to 200 mm. Sheet from 0.1 mm to 6 mm. Custom thicknesses available.
  • Technical support for fabrication. We provide guidance on machining, welding, and heat treatment for Inconel 718 plate and sheet.

 

Quality Control of Inconel 718 Alloy Plates

 

Quality control for Inconel 718 alloy plates spans the entire manufacturing process. Starting from raw materials, strict composition analysis and purity testing of all metal inputs are required. During melting, the temperature and atmosphere must be monitored in real time to ensure accurate control of the alloy composition.

 

During hot working, the processing temperature range and deformation amount must be tightly controlled. Excessively high temperatures can lead to grain coarsening, while temperatures that are too low may cause work hardening or even cracking. Necessary inspections should be carried out after each processing step to detect and address issues promptly.

 

Final product inspection includes dimensional accuracy, surface quality, and mechanical property testing. Dimensional accuracy must meet relevant standards, and the surface should be free from cracks, folds, or other defects. Property testing ensures that all specifications satisfy service requirements. All inspection records must be fully preserved for traceability and analysis.

 

Inconel 718 Plate Applications

 

  • Aerospace: Typical aerospace applications include Aircraft engine components, Gas turbine components,Engine structural parts, High-strength brackets, Supports and mounting components, Seals and related hardware.
  • Oil & Gas: Potential applications include Downhole components,Wellhead equipment, High-pressure components, Corrosion-resistant components, Oil and gas production equipment
  • Industrial Equipment: Inconel 718 plate can also be used for High-temperature tooling, Industrial gas turbine components,Heat-resistant fabricated parts, High-strength machined components, Industrial equipment exposed to demanding temperature and corrosion conditions

 

Final alloy selection should be based on actual operating temperature, mechanical loading, environment, fabrication process, and applicable design requirements.

 

Not sure whether Inconel 718, Haynes 230, Hastelloy X, or Inconel 625 is right for your application? Read the full high-temperature alloy selection guide first, then confirm your specification below.

 

Commercial and Delivery Terms

 

Term Item Details
Minimum Order Quantity Lab‑sample small cut‑pieces negotiable; bulk production MOQ negotiable
Trade Terms EX‑W, FOB, CFR, CIF (Incoterms 2020)
Payment Terms T/T:30% deposit, balance before shipment; Irrevocable L/C at sight.
Sample Service Engineering evaluation cut‑samples available; buyer undertakes freight cost
Lead‑Time Samples:12‑20 working‑days; bulk production:35‑55 working‑days after deposit received
Packaging Anti‑rust protection, moisture‑proof packing, seaworthy export wooden pallet / wooden case for plate & sheet
Shipping Ports Shanghai, Ningbo, Shenzhen and other major China ports
Documents Heat‑number matched Mill Test Report(MTR); PMI / UT inspection reports can be provided on request

 

Need Inconel 718 Plate or Sheet for Your Application?

 

Tell us your required thickness, width, length, quantity, and supply condition. We will confirm availability, provide a quotation, and ship with full documentation.

 

Request a quote →

Or contact our technical team with your machining, welding, and heat treatment requirements - we will recommend the right Inconel 718 plate

specification for your design.

 

Explore our other superalloy products → Inconel 718 Tube | Haynes 230 Alloy | Inconel 625 | Inconel 718 Alloy

 

Technical Article: Haynes 230 vs Haynes 282 vs Inconel 718: A High‑Temperature Alloy Selection Guide for Engineers and Buyers

Compare Inconel 718 plate against Haynes 230 and Haynes 282 plate‑stock, understand temperature boundaries, heat‑treatment requirements and material‑substitution risks for high‑temperature plate procurement projects.

 

Related Reading: Superalloy Material Selection Reference

Inconel 718 delivers exceptional precipitation‑hardened mechanical strength below 650°C; however its performance drops rapidly above this threshold and corrosion resistance is limited in chloride‑rich media. Read our comprehensive buyer guide: Hastelloy X vs Haynes 230 vs Inconel 625 vs Inconel 718: A High‑Temperature Alloy Selection Guide to compare working‑temperature boundaries, welding tips and substitution recommendations for these four major nickel‑base superalloys.

 

FAQ

 

Q1: What is Inconel 718 plate used for?

A: Inconel 718 plate is used for aerospace structural components, oil & gas downhole tools, high-pressure reactor vessels, and precision machined parts requiring high strength and corrosion resistance up to 704°C.

 

Q2: Where can I buy Inconel 718 plate and sheet?

A: From specialty metal suppliers and manufacturers. We supply Inconel 718 plate and sheet with batch-specific MTC, PMI verification, and custom cut sizes.

 

Q3: What is the chemical composition of Inconel 718?

A: Nominal composition: Ni 50.0–55.0%, Cr 17.0–21.0%, Fe balance, Nb+Ta 4.75–5.50%, Mo 2.80–3.30%, Ti 0.65–1.15%, Al 0.20–0.80%.

 

Q4: What are the disadvantages of Inconel 718?

A: High cost, difficult to machine (machinability ~12%), susceptible to hot cracking during welding, limited to ~650°C for long-term service, and higher density than titanium or aluminum.

 

Q5: Can Inconel 718 plate be welded?

A: Yes. Inconel 718 has good weldability with excellent resistance to post-weld cracking. The alloy's slow aging response permits heating and cooling during annealing without cracking.

 

Q6: What is the maximum service temperature of Inconel 718 plate?

A: Inconel 718 plate is used for service up to 1300°F (704°C) for creep and stress rupture resistance, and up to 1800°F (982°C) for oxidation resistance.

 

Q7: What is better than Inconel 718?

A: Haynes 230 for oxidation resistance above 650°C. Haynes 282 for creep strength above 700°C. Titanium for weight-critical, moderate-temperature applications. Inconel 718 remains best for maximum strength below 650°C.

 

Q8: What is the delivery time for Inconel 718 plate?

A: Standard stock sizes ship in 7–15 days. Custom cut sizes ship in 15–30 days, confirmed at order review.

 

Q9: What sizes of Inconel 718 plate and sheet are available?

A: Sheet: 0.1–6 mm thickness. Plate: 6–200 mm thickness. Width up to 1219 mm. Length up to 2438 mm. Custom cut sizes available.

 

Q10: How do I avoid procurement pitfalls when buying Inconel 718 plate?

A: Verify grade (UNS N07718), check chemistry, request batch-specific MTC, confirm solution annealed condition, verify thickness tolerance, and request PMI verification.

 

Q11: What is Inconel 718 plate?

A: Inconel 718 plate is a precipitation-hardenable nickel-based alloy plate identified by UNS N07718. It is used where high strength, corrosion resistance, and elevated-temperature performance are required.

 

Q12: What specifications are available for Inconel 718 plate?

A: Common specifications include AMS 5596, AMS 5597, ASTM B670, and ASME SB670. Haynes International lists AMS 5596, AMS 5597, and SB670/B670 for N07718 Sheet, Plate & Strip.

 

Q13: What is ASTM B670?

A: ASTM B670-25 is a specification covering rolled precipitation-hardening nickel alloy UNS N07718 plate, sheet, and strip for high-temperature service.

 

Q14: What is the difference between AMS 5596 and AMS 5597?

A: Both specifications are listed for HAYNES 718 sheet, plate, and strip. The applicable specification revision, material condition, dimensions, and testing requirements should be confirmed against the customer's drawing or purchasing specification.

 

Q15: Can you supply custom-size Inconel 718 plate?

A: Yes. Custom thicknesses, widths, lengths, and cut-to-size plates can be supplied subject to specification, production capability, and quantity.

 

Q16: Is Alloy 718 the same as Inconel 718?

A: Yes. Alloy 718 and Inconel 718 refer to the same material. Inconel is a trademark; Alloy 718 is the generic designation. Both use UNS N07718.

 

Q17: Is Inconel 718 stronger than titanium?

A: Yes, at room temperature and especially at elevated temperature. Inconel 718 yield strength is ~1100 MPa vs ~790 MPa for Ti-6Al-4V. Inconel 718 also maintains strength up to 700°C; titanium is limited to ~400–500°C.

 

Q18: Why is Inconel 718 hard to weld?

A: Niobium-rich phases can cause liquation cracking in the heat-affected zone. However, its slow aging response makes it more weldable than gamma-prime alloys like Waspaloy.

 

Q19: What are the material properties of Inconel 718 plate?

A: Tensile strength up to 1375 MPa, yield strength up to 1100 MPa, hardness 32–40 HRC. Density 8.23 g/cm³. Service temperature up to 650°C long-term.

 

Hot Tags: Inconel 718 plate, Inconel 718 sheet, Alloy 718 plate, UNS N07718 plate, UNS N07718 sheet, Inconel 718 plate China manufacturer, precipitation hardening nickel superalloy, AMS 5596, AMS 5663

Send Inquiry